C
HAPTER
41
| CFM Commands
– 1320 –
ethernet cfm mep Sets an interface as a domain boundary, defines it as
a maintenance end point (MEP), and sets direction of
the MEP in regard to sending and receiving CFM
messages
IC
ethernet cfm port-enable Enables CFM processing on an interface IC
clear ethernet cfm ais
mpid
Clears AIS defect information for the specified MEP PE
show ethernet cfm
configuration
Displays CFM configuration settings, including global
settings, SNMP traps, and interface settings
PE
show ethernet cfm md Displays configured maintenance domains PE
show ethernet cfm ma Displays configured maintenance associations PE
show ethernet cfm
maintenance-points local
Displays maintenance points configured on this device PE
show ethernet cfm
maintenance-points local
detail mep
Displays detailed CFM information about a specified
local MEP in the continuity check database
PE
show ethernet cfm
maintenance-points
remote detail
Displays detailed CFM information about a specified
remote MEP in the continuity check database
PE
Continuity Check Operations
ethernet cfm cc ma
interval
Sets the transmission delay between continuity check
messages
GC
ethernet cfm cc enable Enables transmission of continuity check messages
within a specified maintenance association
GC
snmp-server enable traps
ethernet cfm cc
Enables SNMP traps for CFM continuity check events GC
mep archive-hold-time Sets the time that data from a missing MEP is kept in
the continuity check database before being purged
CFM
clear ethernet cfm
maintenance-points
remote
Clears the contents of the continuity check database PE
clear ethernet cfm errors Clears continuity check errors logged for the specified
maintenance domain and maintenance level
PE
show ethernet cfm errors Displays CFM continuity check errors logged on this
device
PE
Cross Check Operations
ethernet cfm mep
crosscheck start-delay
Sets the maximum delay that a device waits for
remote MEPs to come up before starting the cross-
check operation
GC
snmp-server enable traps
ethernet cfm crosscheck
Enables SNMP traps for CFM continuity check events,
in relation to the cross-check operations between
statically configured MEPs and those learned via
continuity check messages
GC
mep crosscheck mpid Statically defines a remote MEP in a maintenance
association
CFM
ethernet cfm mep
crosscheck
Enables cross-checking between the list of configured
remote MEPs within a maintenance association and
MEPs learned through continuity check messages
PE
show ethernet cfm
maintenance-points
remote crosscheck
Displays information about remote maintenance
points configured statically in a cross-check list
PE
Table 177: CFM Commands (Continued)
Command Function Mode
To Next Page
Loading...
Need help?
General
