Auxiliary Processing Units (APUs)
PowerPC e500 Core Family Reference Manual, Rev. 1
Freescale Semiconductor 10-11
efdcmpgt efdcmpgt
Floating-Point Double-Precision Compare Greater Than
efdcmpgt crfD,rA,rB
al ← rA
0:63
bl ← rB
0:63
if (al > bl) then cl ← 1
else cl ← 0
CR
4*crD:4*crD+3
← undefined || cl || undefined || undefined
rA is compared against rB. If rA is greater than rB, the bit in the crfD is set, otherwise it is cleared.
Comparison ignores the sign of 0 (+0 = -0).
Exceptions:
If the contents of rA or rB are Infinity, Denorm, or NaN, SPEFSCR[FINV] is set, and the FGH
FXH, FG and FX bits are cleared. If floating-point invalid input exceptions are enabled, an
interrupt is taken and the condition register is not updated. Otherwise, the comparison proceeds
after treating NaNs, Infinities, and Denorms as normalized numbers, using their values of ‘e’ and
‘f’ directly.
efdcmplt efdcmplt
Floating-Point Double-Precision Compare Less Than
efdcmplt crfD,rA,rB
al ← rA
0:63
bl ← rB
0:63
if (al < bl) then cl ← 1
else cl ← 0
CR
4*crD:4*crD+3
← undefined || cl || undefined || undefined
rA is compared against rB. If rA is less than rB, the bit in the crfD is set, otherwise it is cleared.
Comparison ignores the sign of 0 (+0 = -0).
Exceptions:
If the contents of rA or rB are Infinity, Denorm, or NaN, SPEFSCR[FINV] is set. and FGH FXH,
FG and FX are cleared. If floating-point invalid input exceptions are enabled, an interrupt is taken
and the condition register is not updated. Otherwise, the comparison proceeds after treating NaNs,
Infinities, and Denorms as normalized numbers, using their values of ‘e’ and ‘f’ directly.
0 5689101115162021 31
000100 crfD00 rA rB 0 1011101100
0 5689101115162021 31
000100 crfD00 rA rB 0 1011101101
To Next Page
Loading...
