GE CARESCAPE - Color selections; Parameter configurations; Setting up printing options

Settingupthemonitorbeforeuse
Colorselections
Youcanselectdisplaycolorsforthetimerandallparametersaccordingtoyourneeds.
However,notethatthesesettingsarenotadjustableiftheselectionhasbeenlocked.
Formoreinformation,seetheCARESCAPEModularMonitorsSupplemental
InformationManual.
SelectingcolorsforIPchannelswithoutlabels
1.SelectMonitorSetup>Colors.
2.SelecttheInvasivePressurestab.
3.SelectChannels.
4.Selectthecolorsfromthelists.
SelectingcolorsforIPchannelswithlabels
1.SelectMonitorSetup>Colors.
2.SelecttheInvasivePressurestab.
3.SelectLabels.
4.Selectthecolorsfromthelists.
Selectingcolorsforotherparametersandtimer
1.SelectMonitorSetup>Colors.
2.SelecttheOtherParameterstab.
3.Select:
a.Commonandthecolorsfromthelists.
b.Specicandthecolorsfromthelists.
c.SelectthecolorforthetimerthroughSpecic>Timer.
Parametercongurations
Beforemonitoringapatient,alwayschecktheparametersetupsettingsandalarm
limitvalues.Parametersettingsandalarmlimitvaluescanbeconguredbyselecting
MonitorSetup>ParameterSetup,thenselectingaparameter.Youcanalsoaccess
setupandalarmsettingsbyselectingaparameterwindowofaparameterthathas
alreadybeenconguredtothescreen.
Settingupprintingoptions
Youcancheckthattheprintingoptionsforwaveforms,reportsanddevicesareset
accordingtoyourneedswhenyoustartmonitoringapatient.
1.SelectMonitorSetup.
2.SelectPrinting.
3.Checkthesettingsbygoingthroughthedifferentoptionsandchangeifnecessary.
112CARESCAPEModularMonitors2062971-001