GE CARESCAPE - Checking the print status; Printing waveforms; Printing waveforms for an arrhythmia alarm

Printing
4.SelecttheprintouttypefromthePrintoutlist.
Notethattheprintinglocation(seestep5)forTelemetryWaveformswillonlybe
senttothetelemetrywhenstartingthecombinationmonitoringmodewitha
non-admittedtelemetrypatient.
5.Selectthelocationfortheprintout:
IfyouareprintingtothislocationSelectthisoption
LocalrecorderXE-50orPRN50-M
(connecteddirectlytoorbuiltinthe
monitor).
Thisselectionisonlyavailablefor
TelemetryWaveformsifthePRN50-M
recorderisconnected.
Local
Remoterecorderorprinter(arecorder
inanothermonitorintheCARESCAPE
network,orarecorderoraprinter
connectedtoacentralstationinthe
network).
Remote
Networkprinter(aprinterintheIXNetwork
orconnectedtoaniCentral).
Thisisalwaystheprintlocationforreports.
Thisisnotavailableiftheprintouttypeis
TelemetryWaveforms.
Network
6.Accordingtoyourlocationselectionabove:
a.IfyouselectedNetwork:SelecttheprintdevicefromtheNetworkDevicelist.
b.IfyouselectedRemote:ChoosethemonitororcentralstationfromtheUnit
list,andthenselecttheprintdevicefromtheRemoteDevicelist.
NOTE
Youmayassignoneprintouttypetooneprintlocationonly.
NOTE
Changingtheprintlocationdoesnotaffectprintingcurrently
inprogress.
Checkingtheprintstatus
Youcanviewtheassignedprintlocationsforeachtypeofprintoutandcheckthe
printerstatusforeachprintdevice.
1.SelectMonitorSetup>Printing.
2.SelecttheDevicestab>Status.
Printingwaveforms
Printingwaveformsforanarrhythmiaalarm
NOTE
Automaticprintingofwaveformsisalwaysinitiatedbyan
alarm.
1.SelectAlarmSetupfromthemainmenu.
436CARESCAPEModularMonitors2062971-001