GE CARESCAPE - Selecting the SEF%; Selecting the EEG frequency scale; Selecting the EEG impedance cycle time; Selecting the CSA view

EEGandauditoryevokedpotentials
4.SelectaparameterfromtheNumeric2list.
SelectingtheSEF%
Setthepercentageofthespectralpowertodenetheedgefrequency.
1.SelecttheEEGparameterwindow.
2.SelectEEGtab>Setup.
3.SelectavaluefromtheSEF%list.
SelectingtheEEGfrequencyscale
Thefrequencyselectionaffectsthescreenonly,numericparametersarealways
calculatedfromtheentiremeasurementrange.Thisselectionaffectsthecurve
frequencyscaleinEEGparameterwindows,CSAdisplays,andtrenddisplays.
1.SelecttheEEGparameterwindow.
2.SelectEEGtab>Setup.
3.SelectavaluefromtheFreq.ScaleHzlist.
SelectingtheEEGimpedancecycletime
Youcansetthetimeintervalfortheautomaticimpedancecheck.
1.SelecttheEEGparameterwindow.
2.SelectEEGtab>Setup.
3.SelectavaluefromtheImped.Cyclelist.
SelectingtheCSAview
Youcanchoosetoviewagraphicalviewofthespectrumasasingle,continuously
updatingcurve,CSA.
1.SelecttheEEGparameterwindow.
2.SelectEEGtab>View.
3.SelectCSA.ChangingtheviewwillerasethepreviousCSAcontent.
NOTE
Youcanusethedefaulttimescaleorselectavaluefromthe
CSATimeScalelist.
SelectingthetimescaleforCSA
1.SelecttheEEGparameterwindow.
2.SelectEEGtab>SetuporView.
3.SelectavaluefromtheCSATimeScalelist.
NOTE
ChangingthescalewillerasethepreviousCSAcontent.
SelectingtheEEGnumericalview
YoucanchoosetoviewanumericlistofallEEGparametersonallchannels.
1.SelecttheEEGparameterwindow.
380CARESCAPEModularMonitors2062971-001