GE CARESCAPE - Setting automatic 12 lead ECG analysis measurements; Setting the 12 lead ECG analysis display format; Generating a 12 lead ECG analysis report during an ST alarm cond; Performing a 12 lead ECG analysis

ECG
3.SelecttheLocationIDeldandentertheIDwiththeon-screennumerickeypad.
Youcanenteranynumberfrom0to599.
Settingautomatic12leadECGanalysismeasurements
1.SelecttheHRparameterwindow.
2.Select12LeadAnalysis.
3.SelectSettings.
4.SelectatimeintervalfromtheAutoIntervallist.
5.SelectCancelorConrm.
Settingthe12leadECGanalysisdisplayformat
Thissettingwillchangethe12leadECGwaveformdisplayformatandtheprinted
12leadECGreportwaveformformat.
1.SelecttheHRparameterwindow.
2.Select12LeadAnalysis.
3.SelectSettings.
4.SelectaformatfromtheDisplayFormatlist:
●4x2.5-1Rhythm
●4x2.5-3Rhythms
●12Rhythms
●Cabrera
5.SelectCancelorConrm.
Generatinga12leadECGanalysisreportduringanST
alarmcondition
Youcanhavea12leadECGreportautomaticallygeneratedwhenanSTalarm
conditionoccurs.Automaticallygeneratedreportsareviewablethrough12Lead
Analysis>SavedReports.
1.SelecttheHRparameterwindow.
2.Select12LeadAnalysis.
3.SelectSettings.
4.SelectOnfromthe12LeadonSTAlarmlist.
5.SelectCancelorConrm.
Performinga12leadECGanalysis
1.SelecttheHRparameterwindow.
2.Select12LeadAnalysis.
3.Select12LeadNow.
Allthewaveformsinthe12LeadAnalysisviewfreezeduringtheanalysisexceptfor
theECGIwaveform.Analysistakeslessthanonesecondtocomplete.Atthattime,the
2062971-001CARESCAPEModularMonitors169