GE CARESCAPE - Entering administrative information; Loading patient information from the CARESCAPE Network (ADT serv; Loading patient data and trend data from the S;5 Network

Startingandendingmonitoring
5.SelectConrmtoensurethatthenamesyouenteredarevalid.
Enteringadministrativeinformation
AdministrativeinformationcanbetransferredfromthemonitortothePDMonly.
1.Selectthepatientinformationareaonscreen.
2.SelecttheAdministr.Informationtab.
3.SelectEdit.
4.Selecttheeldtobeeditedandenterthedataasrequired:
●VisitNumber
●PrimaryPhysician
●ReferringPhysician.
LoadingpatientinformationfromtheCARESCAPE
Network(ADTserver)
IntheCARESCAPENetwork,patientinformationcanbeloadedfromtheADTserver.
YoucannotmergedatabetweenthemonitorandtheADTserver.
1.Selectthepatientinformationareaonthescreen.
2.SelecttheLoadPatienttab.
3.SelectFindPatients.
4.SelecttheMedicalRecordNumberand/orLastNameeldandenterthe
informationyouhaveavailable.
YoucanalsoaddtheFirstNameinformationbutthesearchdoesnotfunction
withthisinformationonly.
5.SelectFind.
6.Whenthepatientlistappears,selectthepatient.
7.SelectLoadPatientInformationtoloadthedatafromtheADTserver.
Loadingpatientdataandtrenddatafromthe
S/5Network
1.Selectthepatientinformationareaonthescreen.
2.SelecttheLoadPatienttab.
3.SelectacentralstationfromtheCentrallist.
Apatienttableappears,showingallthepatientcasessavedontheselected
centralstation.
4.Selectapatientfromthetable.
2062971-001CARESCAPEModularMonitors121