GE CARESCAPE - Changing snapshot trend scales; Printing snapshot pages; Selecting snapshots to print automatically; Selecting spirometry loops to print with snapshots

Snapshotsandevents
Changingsnapshottrendscales
1.SelectTrends.
2.SelectSnapshotfromtheViewlist.
3.SelectTrendScales.
4.Selectaparametertab:General,IP/NIBP,CardiacOutput,orTemp.
5.Selectscalesforparametersasrequired.
Printingsnapshotpages
1.SelectTrends.
2.SelectSnapshotfromtheViewlist.
3.SelectPrintPage.
4.YoucanstopprintingbyselectingCancelPrinting.
NOTE
TheiCentralcanalsostartsnapshotprinting,seetheiCentral
andiCentralClientUser'sReferenceManualfordetails.
Selectingsnapshotstoprintautomatically
Youcanselectcertainsnapshotstoprintautomatically.
1.SelectTrends.
2.SelectSnapshotfromtheViewlist.
3.SelectSnapshotSetup.
4.Selectthesnapshotstoprint:
●No:Nosnapshotsprintautomatically.
●Alarms:Snapshotscreatedbyalarmsprintautomatically.
●All:Allsnapshotsprintautomatically.
Selectingspirometryloopstoprintwithsnapshots
1.SelectTrends.
2.SelectSnapshotfromtheViewlist.
3.SelectSnapshotSetup.
4.SelectPrintLoop>YesorNo.
Erasingsnapshotsandtrends
Snapshotsandtrendsareerasedwhenyouendacase/dischargeapatient,when
themonitorhasbeenoffformorethan15minutes,orautomaticallyafter24hours
or72hoursdependingonthelicense.Ifthemonitorhasbeenoffforlessthan15
minutes,thesnapshotsarestoredandremainunchanged.
Erasedsnapshotscannotberecovered.Thememoryisautomaticallycheckedevery
timeasnapshotiscreated.Whenthememoryistoofull,themessageSnapshot
memoryfull.Oldestsnapshoterased.isdisplayedinthemessageeldforve
seconds.Ifthecontentsofthesnapshothavebeenchanged,anewsnapshotmay
2062971-001CARESCAPEModularMonitors427