GE CARESCAPE - Saving AEP responses; Selecting a reference AEP; Erasing an AEP reference; Printing an AEP report

EEGandauditoryevokedpotentials
SavingAEPresponses
YoucansettwomarkersperchannelontheAEPwaveforms,andsavethemforlater
reference.Themonitorcalculatesandsavesthelatencyatthesepointsandthe
amplitudebetweenthem.Youcansaveuptosixauditoryevokedpotentials.Thesesix
canalsobethesameresponsewithdifferentcursorpositions.
1.SelecttheEEGparameterwindow.
2.SelecttheAEPtab>Save.
3.SelectChannel1>Lat1.
4.Movethemarkerlinetoasuitablepoint.
5.Repeatsteps3to4forLat2,andthenforChannel2>Lat1andLat2.
6.SelectSaveResponse.
NOTE
Aftersixresponseshavebeensaved,thenextsavedresponse
willoverwritethesecondresponseinthemonitormemory.
SelectingareferenceAEP
Youcanselectasavedauditoryevokedpotentialasareferencethatwillbedisplayed
simultaneouslywiththerealtimeauditoryevokedpotential.
1.SelecttheEEGparameterwindow.
2.SelecttheAEPtab>View.
3.SelectareferenceAEPfromtheReferenceEPlist.
ErasinganAEPreference
NOTE
Thisselectionisnotavailableifyouhavenotsavedany
references.
1.SelecttheEEGparameterwindow.
2.SelecttheAEPtab>View.
3.SelectthereferencetobeerasedfromtheEraseEPlist.
PrintinganAEPreport
NOTE
YoucanonlyprintsavedAEP’s.
1.SelectMonitorSetup>Printing.
2.SelectReports>IndividualReports>AEP.
StoppingtheAEPmeasurement
PresstheEPStart/Stopkeyontheheadboxormodule,or:
1.SelecttheEEGparameterwindow.
2.SelecttheAEPtab>View.
3.SelectStopAEP.
390CARESCAPEModularMonitors2062971-001