SmartAXIS Touch User's Manual 23-15
2 Downloading
23
Online Function
Options dialog box
Download runtime system and additional fonts.
■ Download Runtime system
Select this check box to force download runtime system, irrespective of the runtime system version of the Touch,
when downloading project data. Normally this option should not be used.
■ Download additional fonts
Select this check box to download additional fonts when downloading project data.
If this check box is selected, the following additional fonts can be selected for download to the Touch.
Japanese Large Font (First standard), Japanese Large Font (Second Standard), Chinese, Taiwanese,
Korean, European Large Font, Central European, Baltic, and Cyrillic.
• For details about additional fonts, refer to Chapter 2 “Installed Fonts in the Touch” on page 2-7.
•Clear the Download Additional Fonts check box, to delete all additional fonts that have been
downloaded to the Touch.
• The additional fonts downloaded to the Touch whose check box is cleared will be deleted from the Touch.
Target font size (byte): Shows the total size of the basic fonts and selected additional fonts.
If no additional fonts are selected for download to the Touch, shows the size of
the basic fonts.
Downloadable project size (byte): Shows the amount of project data that can be downloaded. This figure varies
according to the additional fonts selected.
Target Font Information: Confirms the additional fonts installed on the Touch.
To Next Page
Loading...
Need help?
General
