IDEC SmartAXIS Touch FT1A Series User Manual

1 Overview
21-4 SmartAXIS Touch User’s Manual
● Security Groups that Protect Access to Data
Three security groups have been provided to protect access to data. These security groups are Administrator,
Operator, and Reader. Each one of these security groups can only be assigned to a single user.
■ Administrator
The Administrator group possesses complete access rights to project data. This security group can execute all
necessary operations including editing project data and changing Touch project data.
■ Operator
The Operator group can partially change project data by changing values of devices. This security group download
data to external memory.
■ Reader
The Reader group can read data stored on external memory.
●
Operations Subject to Password Protection
If you configure a password for a user account assigned to a security group to protect access to data, access to data
is password protected. The operations that are subject to password protection and the security group that the
password is valid for are as follows.
*1 External memory inserted into the Touch
The provided user account has the security groups Administrator, Operator, and Reader allocated to it.
Passwords have not been configured for this user account. To protect access to data, a password must be
configured for the user account.
User1
Provided security groups
Administrator
Operator
Reader
Operations subject to password protection
Security group that the password is valid for
Administrator Operator Reader
Data editing
Opening projects YES NO NO
Reusing screens YES NO NO
Modifying data
Downloading project data YES NO NO
Downloading data to external memory
*1
YES NO NO
Downloading data to external memory
*1
while the
Touch is running
YES YES NO
Uploading project data YES NO NO
Uploading external memory data
*1
YES YES YES
Deleting all data YES NO NO
Deleting external memory data
*1
YES NO NO
Formatting external memory
*1
YES NO NO
Switching to the Top Page in the System Mode YES NO NO
Displaying Device Monitor YES YES NO
Executing the USB Autorun function YES NO NO
To password protect operations, the lowest level security group out of the security groups enabled with a
password must be assigned to a user account.
The security levels, from highest to lowest, are Administrator > Operator > Reader.
Example: To password protect the operation to display Device Monitor, assign the Operator security group
to a user account. If a user account assigned to the Operator security group does not exist, the
operation is not password protected.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English