SmartAXIS Touch User’s Manual 21-21
2 Security Function Configuration Procedure
21
User Accounts and the Security Function
Operating Procedure
This section describes an example when the current user account has no default user.
1 Press the Goto Screen Button configured with Switch to Base Screen.
The Password screen is displayed.
2 Press
▼
and select User2.
3 Enter the password.
1. Press ↑, ↓, ←, and → to move the cursor to the character selected and then press ENT.
2. Repeat 1 to enter all the characters for the password.
3. Press ↑, ↓, ←, and → to move the cursor to OK and then press ENT.
If the correct password is entered, the user account changes to User2 and the Password screen closes.
Base Screen 2 is displayed.
Press the Goto Screen Button.
Base Screen 1
No user
Touch
Password
ENT
▼
User2
BS CLR OK
A BCDEFGHIJKLM
NOPQRS T UVWXY Z
0123456789
Password
ENT
▼User2
*
BS CLR OK
ABCDEFGHIJKLM
NOPQRS T UVWXY Z
012 3456789
1
2
Password
ENT
▼
User2
********
BS CLR
ABCDEFGHIJKLM
NOPQRS T UVWXY Z
0123456789
OK
1
2
User2
Full
Tank 1
Base Screen 2
Touch
To Next Page
Loading...
