JRC JUE-501 - Page 251

7. Handset Menu System
7-61
Chapter7 Handset Menu System
[Edit User name and/or Secret Code]
Even when one item is to be changed, edit screens of all items are displayed. On the edit screen where
change is not necessary, just press OK button and go to the next screen.
Example)Changing the Secret Code of MARK (No.04), from 1131 to 8765.
Edit
Delete
User name editing screen is displayed. Enter
(overwrite) new User name and press OK
to
change the User name.
Or press OK
button only (In this case, change
of User name is not necessary).
Secret Code editing screen is displayed.
Enter (overwrite) new Secret Code and pre
ss
OK to change the Secret code.
Input range: 0001 to 9000
Or press OK
button only when Secret code is
not to be changed.
In this case, enter (overwrite) 8765 on this
screen and press OK.
Returns to the first
screen.
User Reg. operation selection screen
Fig. 7.9.4.1b Overwriting procedure of User name and
OK
04
MARK
MARK
1131
04
MARK
MARK
8765
Dis
play the user you want to edit
and press MENU .
Name?
MARK
OK
Level?
Guest
OK
Secret Code?
8765
OK
OK
Rest.?
Disable
Rest1
Rest2
:
:
Select [Edit] and press OK .
User Reg. Level selection screen
Select level and press OK .
User Reg. User Name editing screen
User Reg. Secret Code editing screen
User Reg. Rest. selection screen
Select the restriction applied to the user and press
OK.
The list shown here are th
e restrictions preset by
user. Refer to [7.9.4.2 Usage Rest. setting] for
detail. “Disable” sets no restriction.
OK
NOTE
* User 01 is reserved
for an Admin user.
You can not delete it
nor can edit its level.
* User 02 is reserved
for Guest user. You
can not delete it nor
can edit its level,
name and Secret
Code.
*
WAN Profile, Multi
Connect and Quick
Connect are
not set by
Handset.
8 Alarmpack
9 Admin
4 User Cont.
5 Auto Discon
READY
1 User Reg.
2 UsageRest.
MENU