Appendix D Software updating procedure
D-13
5. Click [Update] button.
・ The [Update] button changes into disable (gray).
・ Wait until the [Update] button recovered and the update was completed.
6. Check the result.
・ [Success] is displayed when the update finished successfully. Then, reboot your system.
・ [Update Error] is displayed when the update has failed. Go to the next page.
* Please do not operate your Web browser until the result is printed. It may
than 3 minutes.
* In the case of unresponsiveness in 5 minutes, please retry software updating
following page D-8 of this manual from A) to E).
To Next Page
Loading...
