Korg NAUTILUS Series Parameter Guide

SEQUENCER > Home 0–1: Mixer
451
L, R, L/R: This is the L/R bus, after passing through both
TFX 1 and 2. Choose this if you want to record an external
audio signal being sent to the L/R bus (specified by 0–8a), or
the sound being produced by the NAUTILUS (and sent to
the L/R bus) in response to sequencer playback, keyboard
playing, or MIDI input. See the diagram “REC Source = L,
R,” below.
If Stereo Pair is on, L is sent to odd-numbered tracks, and R
is sent to even-numbered tracks.
REC 1, 2, 1/2, REC 3, 4, 3/4: The REC 1/2 or REC 3/4
buses will be recorded. Choose this if you want to record
only the audio input while hearing the sequencer playback
and your keyboard playing from the L/R outputs. You can
also mix several audio inputs to the REC buses, or use the
REC buses to mix the direct sound from the audio inputs
with the sound processed by insert effects, and record the
result. For more information, see the diagram “REC Source
= REC Bus 1, 2.”
If Stereo Pair is on, REC Bus 1 (3) is sent to odd-numbered
tracks, and REC Bus 2 (4) is sent to even-numbered tracks.
REC Source
= L, R
Insert
Eects
L/R
Bus
Total
Eects
Master
Eects
Sequencer Playback
Keyboard
Bus = L/R or IFX1-12
CLIP !
L/MONO
R
AUDIO OUTPUT
HEADPHONES
Recording (Multi REC)
Monitor
Bus = O, Indiv.1...8
LevelPan
HDR Track (Mono)
HDR Track (Mono)
L
R
REC Source
REC
1,2,3,4
Indiv.
1,2,3,4
When an audio track’s Bus Select is set to L/R, the Rec input will
automatically be muted to prevent a feedback loop. The same will occur if
you set Bus Select to IFX and send the post-IFX signal to the L/R Bus.
Set Play/Rec/Mute
to Rec
L/R
Bus
Insert
Eects
REC Bus = 1,2
REC Source
= REC Bus 1 (2)
REC
1,2, 3, 4
Indiv.
1,2,3,4
Sequencer Playback
Keyboard
Bus = L/R or IFX1-12
CLIP !
Bus = L/R or IFX1-12
Insert
Eects
Level
Pan
Recording
HDR Track (Mono)
REC Source
REC1
L/MONO
R
AUDIO OUTPUT
HEADPHONES
[x] Source Direct Solo
Total
Eects
Master
Eects
Monitor
If REC Source is set to REC Bus 1 or 2, setting the Audio Track REC Bus to 1 or 2 will
automatically cause the Rec input to be muted in order to avoid a feedback loop. If
you route the signal to IFX, the same thing will occur if you send the post-IFX
signal to REC Bus 1 or 2.
Audio Track selected in
Track Select

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)