Korg NAUTILUS Series

MEDIA: Page Menu Commands Load selected
709
Load a Region
This loads the selected region data into the region number
you select as the load-destination.
1. If you’re loading region data other than the selected
data, use “Region” (the upper line) to reselect the
region data you want to load.
2. Use “To Region” (the lower line) to select the load-
destination region.
3. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load .KFX (FX Presets)
All data from the .KFX file will be loaded. All preset data
(P01–15) and user data (U00–15) for all effects will be
loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load All Presets (P01…15)
All preset data from the .KFX file will be loaded. All presets
(preset) data (P01–15) for all effects will be loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load All Presets (U00…15)
All user data from the .KFX file will be loaded. All preset
(user) data (U01–15) for all effects will be loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Presets (P01–15)
Preset (preset) data (P01–15) for the selected effect will be
loaded.
Load Presets (P01-P15) in “Stereo Dyna Compressor”
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Presets (U00…15)
Preset (user) data (U00–15) for the selected effect will be
loaded.
Load Presets (U00-U15) in “Stereo Dyna Compressor”
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load a single Preset (P)
The selected effect preset data (P01–15) will be loaded into
the load-destination effect preset number (P01–15, U00–
U15) you specify.
Load a Preset in “Stereo Dyna Compressor”
1. If you’re loading an effect preset other than the
selected one, use “Preset” (the upper line) to re-select
the effect preset that will be loaded.
2. Use “To Preset” (the lower line) to select the load-
destination effect preset.
3. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Note: If “Multiple Select” (0–1a) is checked and you’ve
selected more than one effect preset, the data will be loaded
starting with the effect preset you specified in the “To” field.