Message Count Display
UX Mail Manual Chapter 2: Features ◆ 193
2
Message Count Display
Description
If you press CHECK and dial *0 at an idle keyset, the display will show the number of new messages wait-
ing in the mailbox.
Message Check Display
When you log onto your mailbox, your display shows the active Message List (New, Saved, Held, or All)
and the number of messages in the active list. For display keysets, this information is on the top line. For
Super Display keysets, this information is on the bottom line. For more on logon screens, turn to
KEYSET STA-
TUS LINE (PAGE 720) and SUPER DISPLAY STATUS LINE (PAGE 727).
Logon Display
Related Features
N/A
Programming
No additional programming required.
Operation
Using the Message Count Display
To view the Message Count Display:
1.
Press CHECK and dial *0.
■ You can press Vol ▲ and Vol ▼ to scroll your voice mail messages, VRS messages, and Message Waiting
indications.
■ While your voice mail Message Count displays, press an idle CALL key to call your mailbox.
One message waiting in the
Subscriber Mailbox
Message List
Total messages in list
To Next Page
Loading...
