NEC UX5000 - Mailbox Options: Directory Dialing: [General]; General Tab; [General] Name; [General] Type

Customize
Mailbox Options: Directory Dialing: [General]
UX Mail Manual Chapter 3: Programming ◆ 361
3
Mailbox Options: Directory Dialing: [General]
Description
A Directory Dialing mailbox lets you set up a type of Directory Dialing that bypasses the Automated Atten-
dant. The Directory Dialing mailbox can answer outside calls, play a unique message, and let callers imme-
diately dial by name. Outside caller do not have to go through the Automated Attendant, listen to the
Welcome Message and Instruction Menu, and then dial additional codes.
General Tab
■ See DIRECTORY DIALING MAILBOX (PAGE 129) for more.
[General] Type
Use this option to select the mailbox type.
Options
● Select Dir. Dialing.
Default
✔ By default, there are no Directory Dialing Mailboxes defined.
[General] Name
You can program a name for a Directory Dialing Mailbox. Voice mail can use this name for Directory Dial-
ing. This name also appears on system reports.
● To allow Automated Attendant callers to Directory Dial a Directory Dialing Mailbox, be sure to
define the Directory Dialing Mailbox leading digit in your Dial Action Tables. If you choose 810 for
your Directory Dialing Mailbox, for example, in your Dial Action Tables for digit 8, be sure Action =
TRF or UTRF and Number = XXX.
● See DIRECTORY DIALING (PAGE 120) for more.
● See REPORTS (PAGE 267) for more on the system’s reports.
Options
● Characters (25 characters maximum, using A-Z)
Default
✔ No entry.