Tools
Networking
UX Mail Manual Chapter 3: Programming ◆ 531
3
Networking
Description
Use the Networking option to ping your email server or web site and to display important information about
the UX Mail network settings.
To ping a web site:
1. In HostName, enter the web site URL (e.g., www.website.com).
2. Click Ping.
3. The system pings the web site (3 times).
● The on-screen message shows the status of the ping attempt.
To test a web site’s http port:
1. In HostName, enter the web site URL (e.g., www.website.com).
2. Click Web Test.
3. The system accesses the web site’s http port.
● The on-screen message shows the status of the http access and (if successful) displays the site’s http
port number.
To test a web site’s telnet capability:
1. In HostName, enter the web site URL (e.g., www.website.com).
2. (Optional) In HostPort, enter the specific port you want to test.
3. Click Telnet.
4. The system accesses the web site’s telnet port.
● The on-screen message shows the status of the telnet and (if successful) displays the site’s telnet port
number.
To scan a web site for open ports:
1. In HostName, enter the web site URL (e.g., www.website.com).
2. Click nmap.
3. The system scans the web site for open ports.
● The on-screen message shows the site’s open and closed ports.
To display important information about your UX Mail network settings:
1. Click Info.
● NEC Unified Solutions Technical Services personnel may request this information when trouble-
shooting your system.