Customize
Mailbox Options: Guest: [General]
UX Mail Manual Chapter 3: Programming ◆ 371
3
[General] Next Call Routing Mailbox
Use this option to assign a Next Call Routing Mailbox to the Guest Mailbox. This provides callers with addi-
tional dialing options after they leave a message in the Guest Mailbox. The following table shows these options
(which are equivalent to
Next Call Routing Mailbox Dial Mode
setting of
None
for Subscriber Mailboxes.
● Clicking on the Next Call Routing Mailbox button automatically opens the programming screen for
the designated Call Routing Mailbox.
● See NEXT CALL ROUTING MAILBOX (PAGE 247) for more.
Options
● Call Routing Mailbox Number (7 digits maximum, using 0-9).
● N (None)
Default
✔ 811
[General] Tenant
Use this option to specify to which Tenant Group the Guest Mailbox belongs. If Tenant Groups are not set up
in Customize: System Options:
[GENERAL 1] NUMBER OF TENANTS (PAGE 460), voice mail provides a single tenant.
● See TENANT SERVICE (PAGE 287) for more.
Options
● 1-4 (Tenant Groups 1-4)
Default
✔ 1
Guest Mailbox Next Call Routing Mailbox Dialing Options
Action While listening to greeting or while recording: While recording is paused:
0
Sends message (if any) and executes 0 action from Next
Call Routing Mailbox.
Plays recording options help message.
1
Pauses recording. Dial * to continue.
2
Pauses recording. Dial * to continue.
3
Erases message (if any) and prompts to re-record.
4
Pauses recording. Dial * to continue.
5
Plays recorded message (if any) and pauses. Dial * to append.
6
Pauses recording. Dial * to continue.
7
Pauses recording. Dial * to continue.
8
Pauses recording. Dial * to continue.
9
Pauses recording. Dial * to continue.
#
1
Sends message (if any) and hangs up.
*
Pauses and restarts recording.
Timeout
Pauses recording. Dial * to continue.
1
If the call is routed from a Call Routing Mailbox (e.g., the Automated Attendant), dialing # routes the call back to that
Call Routing Mailbox (the previous Call Routing Mailbox) and plays its Instruction Menu.