NEC UX5000 - Callout Options: [Optional]; [Optional] Delay before Fax Carrier Detect; [Optional] Number of Fax Callout Attempts; [Optional] Number of Network Callout Attempts

Customize
Callout Options: [Optional]
330 ◆ Chapter 3: Programming UX Mail Manual
Callout Options: [Optional]
Optional Tab
[Optional] Wait between Network Callouts
If a network callout to deliver a network message can’t go through (i.e., if the remote site is busy or doesn’t
answer), use this option to set how long the system should wait before retrying the callout.
● See NETWORKING (AMIS) (PAGE 236) for more.
Options
● Time in minutes (1-999).
Default
✔ 2 minutes.
[Optional] Number of Network Callout Attempts
Use this option to set how many times the system should attempt to complete a network callout to deliver a
network message. The value you enter includes the initial delivery attempt plus retries. For example, with
the default setting of 2, the system will try the initial network callout and retry once. If the callout still
doesn’t go through, the system sends the network message back to the mailbox of the extension that initially
sent it.
● See NETWORKING (AMIS) (PAGE 236) for more.
Options
● Number of attempts (1-99).
Default
✔ 2 attempts.
[Optional] Wait between Fax Callouts
Not used.
[Optional] Number of Fax Callout Attempts
Not used.
[Optional] Delay before Fax Carrier detect
Not used.