Customize
Port Options
456 ◆ Chapter 3: Programming UX Mail Manual
Allow Lamp Callouts
Use this option to enable or disable message waiting lamp updates for this port.
Options
● Yes or No.
Default
✔ No for ports 1-3.
✔ Yes for port 4.
Allow Notification Callouts
Use this option to enable or disable Message Notification callouts for this port. If enabled, Message Notification
can use this port when dialing the callout number. If disabled, Message Notification callouts cannot use this port .
● See MESSAGE NOTIFICATION (PAGE 199) for more.
Options
● Yes or No.
Default
✔ Yes for all ports.
Allow Network
Use this option to enable or disable Networking callouts for this port. If enabled, Networking can use this
port when calling the remote site to deliver a network message. If disabled, this port is unavailable for Net-
working callouts.
● See NETWORKING (AMIS) (PAGE 236) for more.
Options
● Yes or No.
Default
✔ No.
Immediate Self Test
Use this option to perform an immediate Self Test diagnostic on the port. See Self Test above for more on
this diagnostic.
● Clicking on the Do Immediate Self Test button immediately runs the Self Test diagnostic for the port.
● See DIAGNOSTICS (PAGE 114) for more.
Options
● N/A
Default
✔ N/A
Be sure at least one voice mail port has this option enabled.
If Message Notification is enabled for the system, be sure
at least one voice mail port has this option enabled.
If Networking is enabled for the system, be sure
at least one voice mail port has this option enabled.
To Next Page
Loading...
