NEC UX5000 - Mailbox Options: Interactive: [Interactive]; Interactive Tab; [Interactive] Mailbox; [Interactive] Silence Limit

Customize
Mailbox Options: Interactive: [Interactive]
UX Mail Manual Chapter 3: Programming ◆ 387
3
Mailbox Options: Interactive: [Interactive]
Interactive Tab
[Interactive] Silence Limit
This timer sets how long voice mail will wait when the Interactive Mailbox caller is silent (i.e., stops record-
ing). This is helpful to rotary dial callers that cannot dial digits to confirm that they have completed leaving
a message. After playing the initial prompt, voice mail:
1. Waits the Silent Limit for Responses interval for a response.
2. Repeats the prompt.
3. Waits the Silent Limit for Responses interval for a response.
4. Repeats the prompt again.
5. Waits the Silent Limit for Responses interval for a response.
6. Routes the caller back to the Automated Attendant (Call Routing Mailbox).
● See INTERACTIVE MESSAGING (PAGE 166) for more.
Options
● 1-25 seconds.
Default
✔ 3 seconds.
[Interactive] Mailbox
Use this option to determine into which mailbox the Interactive Mailbox caller’s responses should be
recorded. Normally, this is a Subscriber, Message Center, or Guest Mailbox.
● Clicking on the Mailbox button automatically opens the programming screen for the mailbox you
entered for this option.
● See INTERACTIVE MESSAGING (PAGE 166) for more.
Options
● Mailbox Number (7 digits maximum, using 0-9).
● N (None).
Default
✔ N (None).