NEC UX5000 - [Optional] Caller ID Make Call Suffix Digits

Customize
Callout Options: [Optional]
332 ◆ Chapter 3: Programming UX Mail Manual
[Optional] Caller ID Make Call Suffix Digits
Use this option to add digits and commands to the end of the number dialed by a Caller ID callback. This is
a system-wide feature that globally affects all Caller ID Return Calls.
● See CALLER ID WITH RETURN CALL (PAGE 99) for more.
Options
● Digits (10 maximum, using 0-9, # and *)
● N (None)
● A (Analyzed pause)
This command waits for 4 seconds, and then continues if busy tone or reorder tone are not detected.
● F (Flash)
This command hook flashes the voice mail port, which places it on Hold. To set the duration of the
Flash Timer, see
CUSTOMIZE: SYSTEM OPTIONS: [TIMERS] FLASH TIMER (PAGE 474).
● H (Hang up)
This command tells voice mail to hang up. To set the duration of the Hang Up Timer, see
CUSTOMIZE:
SYSTEM OPTIONS: [TIMERS] HANG UP TIMER (PAGE 475).
● M (Monitored pause)
This command waits for 2 seconds, and then continues if busy tone or reorder tone are not detected.
● P (Pause)
This command waits for 2 seconds and then continues. You can enter a pause command anywhere in
the dial string.)
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
● W (Wait for dial tone)
This command waits for CO dial tone, and then continues.
Default
✔ N (None)