NEC UX5000 - Numbering Plan; View

View
Install Options
UX Mail Manual Chapter 3: Programming ◆ 315
3
Numbering Plan
To set up the extension and trunk numbering:
1. From the Main Menu, click Install Options.
1. Click the Numbering Plan link.
2. For Number of Extensions, enter the total number of Subscriber or Trunk Mailboxes in your system
(depending on what you are programming).
Options
● Up to 4 digits, using 0-9.
✔ 199 (Default for Subscriber Mailboxes).
✔ 72 (Default for Trunk Mailboxes).
3. For Starting Extensions, enter the first Subscriber Mailbox or Trunk Mailbox number.
Options
● Up to 7 digits, using 0-9, or None.
✔ 301 (Default for extensions).
✔ 001 (Default for trunks).
4. For Extension Type, select a type for the entry you are programming.
Options
● Undefined.
✔ Subscriber (Default for extensions).
✔ Trunk (Default for trunks).
5. For Numbering Plan, click Apply Changes.
6. Click Back.
7. For Option, select Install System.
● The system will restart with the new numbering.
View
Selecting Install System in the next step will default your
system and restart it with the new numbering plan.