Customize
Callout Options: [General]
328 ◆ Chapter 3: Programming UX Mail Manual
● Also see [General] WAIT BETWEEN NON-PAGER RNA CALLOUTS below for how voice mail determines that a
call is Ring No Answer.
Options
● Time in minutes (1-999).
Default
✔ 30 minutes.
[General] Wait between Non-Pager Busy Callouts
Once a non-pager notification cycle begins, voice mail will wait this interval before retrying a callout that
was busy at the called party.
● See MESSAGE NOTIFICATION (PAGE 199) for more.
Options
● Time in minutes (1-999).
Default
✔ 5 minutes.
[General] Wait for Non-Pager Answer
If a non-pager callout rings longer that this interval, voice mail marks the call as unanswered (Ring No Answer)
and hangs up.
● See MESSAGE NOTIFICATION (PAGE 199) for more.
● Also see [General] WAIT BETWEEN NON-PAGER RNA CALLOUTS above.
Options
● Number of Rings (1-99).
Default
✔ 20 rings.
[General] Number of Non-Pager Callout Attempts
Once a non-pager notification cycle begins, voice mail will retry an incomplete callout for the number of
times specified in this option. If the total of callouts that are unacknowledged, Ring No Answer or busy
exceeds the setting of this option, voice mail cancels the notification.
● See MESSAGE NOTIFICATION (PAGE 199) for more.
Options
● Number of attempts (1-99).
Default
✔ 3 attempts.
[General] Wait between Pager Callouts
Once a pager notification cycle begins, voice mail will wait this interval before retrying an unanswered or
busy callout.
● See MESSAGE NOTIFICATION (PAGE 199) for more.
● Any pager notification call is considered acknowledged (completed) if it is answered.
Options
● Time in minutes (1-999).
Default
✔ 2 minutes (30 minutes in UX Mail).
[General] Send Pager Callouts Until Acknowledged
When this option is enabled, a pager notification cycle will continue until callout completes. When this
option is disabled, a pager notification will continue for the interval set by
[General] NUMBER OF NON-PAGER
CALLOUT ATTEMPTS above.
● See MESSAGE NOTIFICATION (PAGE 199) for more.