Installation
Install Options
UX Mail Manual Chapter 3: Programming ◆ 313
3
Installation
Install Options
Description
Use this option to select basic configuration options for your voice mail.
To access the Install Options:
1. From the Main Menu, click Install Options. You see:
Phone System
This option is assigned to NEC UX5000. You cannot change it.
Ports
To change the number of voice mail ports installed:
● This option should be set automatically and not need to be manually programmed.
1. From the Main Menu, click Install Options.
2. For Ports, enter the number of ports currently installed (up to 16).
3. For Option, select Install Ports.
4. Reset the UX Mail.
● You must reset the system so it will recognize the new port configuration.
Compression
To change the voice compression:
1. From the Main Menu, click Install Options.
2. For Compression, select the compression rate voice mail will use when storing messages.
● Review VOICE COMPRESSION RATE (PAGE 304) before changing the default entry.
Options
✔ 32 kbits/sec (Default) (maximized for voice recording quality)
● 24 kbits/sec (maximized to conserve storage space).
3. For Option, select Install System.
● The system will restart with the voice compression settings.
Selecting Install System in the next step will default your
system and restart it with the new compression rate.
To Next Page
Loading...
