Customize
Mailbox Options: Network: [Network]
414 ◆ Chapter 3: Programming UX Mail Manual
[Network] Networking Site Restriction Options
Use the Prefix Number, Country Code, Area Code, and Phone Number options for entering the number of the
remote site to which messages left in the Network Mailbox will be delivered, as well as for setting up Net-
working Site Restriction (page 237).
If setting up Networking Site Restriction, use the illustration below as an example of the related options in
both the sending and receiving systems for a typical system installed in North America.
1. In the sending system, enter the number of the sending system in Customize: Tenant Options: [GENERAL]
SITE’S NETWORK TELEPHONE NUMBER (PAGE 477) (using # delimiters).
● Enter the number exactly as it should be dialed, excluding the leading 1 (if required) and trunk access
codes.
2. In the receiving system, enter this same number in the Network Mailbox and turn on Selected Incoming
Network Call Mode in System Options.
●
Enter the number in the
Prefix Number, Country Code, Area Code, and Phone Number
fields.
- The mailbox can be either a Network Remote Mailbox or a Network Alias Mailbox.
● Choose Selected in Customize: System Options: [GENERAL 1]: INCOMING NETWORK CALL MODE (PAGE 459).
To Next Page
Loading...
