NEC UX5000 User Manual

Customize
Mailbox Options: Subscriber: [Lamp/Logon/Transfer]
434 ◆ Chapter 3: Programming UX Mail Manual
[Lamp/Logon/Transfer] Transfer-Only Mailbox
Use this option to designate the Subscriber Mailbox as a Transfer-Only Mailbox. With a Transfer-Only
Mailbox, the Automated Attendant can transfer calls to the mailbox but callers cannot leave a message.
Transfer-Only Mailbox applies only
to the following types of calls:
● Calls routed from the Automated Attendant using the Screened Transfer (TRF), Directory Dialing
(DIRF or DIRL) or Quick Message (REC) actions.
● Calls routed from a Directory Dialing Mailbox.
If the call is not answered at the Transfer-Only Mailbox, voice mail routes the call back to the Call Routing
or Directory Dialing Mailbox that initially routed it.
● See TRANSFER ONLY MAILBOX (PAGE 292) for more.
Options
● Yes or No.
Default
✔ No.
[Lamp/Logon/Transfer] Use Remote Login as Direct
Use this option to change the Remote Logon protocol for the extension associated with this Subscriber Mail-
box. A Remote Logon occurs when an extension user directly dials a voice mail port (instead of pressing
their Message Waiting key). If enabled, an extension user can dial a specific voice mail port and log onto
their mailbox (just as if they pressed their Message Waiting key). If disabled, a Remote Logon requires the
extension user to separately dial their mailbox number after dialing a specific voice mail port.
● The setting of this option has no affect on Direct Logon (i.e., pressing the Message Waiting key).
● Normally, this option is not used.
● See SUBSCRIBER MAILBOX (PAGE 279) for more.
Options
● Yes or No.
Default
✔ No.
[Lamp/Logon/Transfer] First Login Option
Use this option to set up the First Time Tutorial options for the Subscriber Mailbox. The First Time Tutorial
will occur only when the subscriber logs into their mailbox for the first time.
● See FIRST TIME TUTORIAL (PAGE 139) for more.
Options
● None (First Log In Option disabled).
● Option 1
At initial log in, mailbox plays Announcement Message from the First Log In Announcement Mailbox
specified below.
● Option 2
At initial log in, Mailbox plays Announcement Message from the First Log In Announcement Mailbox
specified below, followed by instructions on how to record a Personal Greeting and Mailbox name as
well as enter a Security Code.
Default
✔ None (First Log In Option disabled).
To enable Transfer-Only Mailbox:
■ The Subscriber Mailbox must not have a Personal Greeting recorded.
■ The call can only be routed to the extension from the Automated Attendant (Call Routing
Mailbox) TRF option, or via Directory Dialing.

NEC UX5000 Specifications

General

Brand	NEC
Model	UX5000
Category	Telephone
Language	English