UX Mail Administrator Program
14 ◆ Installation UX Mail Manual
Starting the UX Mail Administrator Program
The UX Mail Administrator program for UX Mail uses your web browser installed on your PC and the built-
in web server on the UX Mail blade.
To start the UX Mail Administrator program:
1. Set the UX Mail IP and gateway addresses. Turn back to the following for more:
● ASSIGNING THE UX MAIL TCPIP ADDRESS, SUBNET MASK, AND GATEWAY ADDRESS (PAGE 10).
2. In the browser Address Line, type in the UX Mail IP address and press Enter.
3. You’ll see the UX Mail Administrator program opening screen:
To Next Page
Loading...
