EasyManuals Logo

NEC UX5000 User Manual

NEC UX5000
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Programming
8 â—† Installation UX Mail Manual
Programming
UX Mail Programming
Basic Setup
16-02-01: DEPARTMENT GROUP ASSIGNMENT FOR EXTENSIONS
Assign the UX Mail extensions to a unique Department Group (e.g., 2).
- These are the extensions automatically assigned by the system to the UX Mail blade. The
extensions should be consecutive.
- No other extensions should be in this group.
- Do not use Department Group 1.
- Be sure to set up the Department Group in order. (For example, the first extension should be
order 1, the second order 2, etc.).
✔ By default, all extensions are in Department Group 1.
11-07-01: DEPARTMENT GROUP PILOT NUMBERS
Assign the Pilot Number for the UX Mail Department Group (e.g., 700).
✔ By default, there are no Pilot Numbers assigned.
45-01-01: VOICE MAIL INTEGRATION OPTIONS, VOICE MAIL DEPARTMENT GROUP NUMBER
Enter the Department Group you assigned in step 1 above (e.g., 2).
✔ By default, there is no Department Group assigned.
15-03-01: SINGLE LINE TELEPHONE BASIC DATA SETUP - SLT SIGNALING TYPE
For each UX Mail extension, enter 0 (DP).
✔ By default, this option is 1 (DTMF).
15-03-03: SINGLE LINE TELEPHONE BASIC DATA SETUP - TERMINAL TYPE
For each UX Mail extension, enter 1.
- This allows UX Mail to receive voice mail commands dialed from system extensions.
✔ By default, this option is 0.
15-07-01: PROGRAMMING FUNCTION KEYS
Voice Mail keys are code 77.
The additional data is normally the number of the extension you are programming.
- Keysets can also have Voice Mail keys for Virtual Extensions, a co-worker, or an uninstalled
extension (for Message Center operation).
- Extension users can use Service Code 851 to set up their own Voice Mail keys.
✔ By default, there are no Voice Mail keys assigned.
1. Assign the UX Mail extension numbers to a unique Department Group.
2. Assign a master number to the UX Mail Department Group.
3. Specify the Department Group used for UX Mail.
4. Set the dialing type to Dial Pulse (DP) for each UX Mail extension.
5. Set the terminal type for each UX Mail extension.
6. Program Voice Mail keys on system extensions.

Table of Contents

Other manuals for NEC UX5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC UX5000 and is the answer not in the manual?

NEC UX5000 Specifications

General IconGeneral
BrandNEC
ModelUX5000
CategoryTelephone
LanguageEnglish

Related product manuals