Customize
Mailbox Options: Network: [General]
406 ◆ Chapter 3: Programming UX Mail Manual
[General] Name
You can program a name for a Network
Alias
Mailbox.
Voice mail
can use this name for Directory Dialing.
This name also appears on system reports.
Directory Dialing is not available with Network Remote Mailboxes.
● To allow Automated Attendant callers to use Directory Dial to access the Network Mailbox (using the
default mailbox numbering), for digit 8 be sure Action = TRF, UTRF, LOGON, or GOTO and Number
= XXX.
● See DIRECTORY DIALING (PAGE 120) for more.
● See REPORTS (PAGE 267) for more on the system’s reports.
Options
● Characters (25 characters maximum, using A-Z)
Default
✔ No entry.
[General] Department
Use this option to assign a department name to the Network Mailbox. This information appears on the Dis-
tribution List (page 495) and Mailbox Options (page 497) reports.
Options
● Characters (10 characters maximum, using A-Z).
Default
✔ No entry.
[General] Next Call Routing Mailbox
Use this option to assign a Next Call Routing Mailbox to a Network
Alias
Mailbox. This provides callers with
additional dialing options after they leave a message in the Network Mailbox (depending on the setting of
Next
Call Routing Mailbox Dial Mode
below).
This option does not apply to Network Remote Mailboxes
.
● Clicking on the Next Call Routing Mailbox button automatically opens the programming screen for
the designated Call Routing Mailbox.
● See NEXT CALL ROUTING MAILBOX (PAGE 247) for more.
Options
● Call Routing Mailbox Number (7 digits maximum, using 0-9).
● N (None)
Default
✔ N (None)
To Next Page