Customize
Mailbox Options: Subscriber: [Lamp/Logon/Transfer]
UX Mail Manual Chapter 3: Programming ◆ 433
3
Mailbox Options: Subscriber: [Lamp/Logon/Transfer]
Lamp/Logon/Transfer Tab
[Lamp/Logon/Transfer] Message Waiting Lamp
Use this option to enable or disable Message Waiting lamping at the extension associated with the Sub-
scriber Mailbox. Normally, you should leave this option enabled.
● See SUBSCRIBER MAILBOX (PAGE 279) for more.
Options
● Yes or No.
Default
✔ Yes
[Lamp/Logon/Transfer] Lamp Off String
TBD
[Lamp/Logon/Transfer] Lamp Off String
TBD
[Lamp/Logon/Transfer] Forced Unscreened Transfer
Use this option to enable or disable Automated Attendant Forced Unscreened Transfer for the Subscriber
Mailbox. If enabled, each Screened Transfer (TRF) to the extension is converted to an Unscreened Transfer
(UTRF). If disabled, Screened Transfers from the Automated Attendant occur normally.
● See SCREENED TRANSFER (PAGE 270) and UNSCREENED TRANSFER (PAGE 299) for more.
Options
● Yes or No.
Default
✔ No.
Compatibility Guidelines:
■ When using the UX Mail Administrator to enter dial strings, take care not to enter illegal characters
(such as dashes). Enter only those characters allowed by the option you are programming.
To Next Page
Loading...
