Customize
Mailbox Options: Trunk
452 ◆ Chapter 3: Programming UX Mail Manual
Extension
Use this option to assign the Trunk Mailbox to a trunk. The options programmed for the Trunk Mailbox
apply to each call answered on the specified trunk. Normally, this option is the same as the Trunk Mailbox
number.
● See TRUNK MAILBOX (PAGE 296) for more.
Options
● Digits (7 digits maximum, using 0-9).
● N (None)
Default
✔ Extension is the same entry as Mailbox Number.
Tenant
Use this option to specify to which Tenant Group the Trunk Mailbox belongs. If Tenant Groups are not set
up in Customize: System Options: [GENERAL 1] NUMBER OF TENANTS (PAGE 460), voice mail provides a single ten-
ant.
● See TENANT SERVICE (PAGE 287) for more.
Options
● 1-4 (Tenant Groups 1-4)
Default
✔ 1
Directory List
This option is not used.
Bilingual Mode
Use this option to set the prompt language for any calls handled by this Trunk Mailbox. Your choices are
English (1) (English mnemonic) and English (2) (English numeric), unless the System Administrator has
substituted French or Spanish for one (or both) of these default languages. When the Automated Attendant
answers a call on the trunk handled by this Trunk Mailbox, the caller hears voice prompts in the language
specified by this option.
●
This option applies only to voice mail’s prerecorded voice prompts. If you intend to record a customized
Welcome Message and Instruction menu, consider recording it in the language specified by this option.
● See BILINGUAL VOICE PROMPTS (PAGE 73) for more.
Options
● Choose one of 2 language choices.
● Normally, the options are:
English (1) - English mnemonic.
English (2) - English numeric.
Default
✔ English (1)
This is English mnemonic.
To Next Page
Loading...
