NEC UX5000 - Mailbox Options: Subscriber: [Messaging]; Messaging Tab; [Messaging] Message Listen Mode; [Messaging] Message Playback

Customize
Mailbox Options: Subscriber: [Messaging]
430 ◆ Chapter 3: Programming UX Mail Manual
Mailbox Options: Subscriber: [Messaging]
Messaging Tab
[Messaging] Message Playback
Use this option to set the Subscriber Mailbox message playback order. When a subscriber listens to their
messages, voice mail can play the oldest messages first (first-in-first-out, or FIFO), or the newest messages
first (last-in-first-out, or LIFO).
● See MESSAGE PLAYBACK DIRECTION (PAGE 218) for more.
Options
● FIFO (first-in-first-out, or oldest first).
● LIFO (last-in-first-out, or newest first).
Default
✔ FIFO (first-in-first-out, or oldest first).
[Messaging] Message Listen Mode
Use this option to determine the type of messages a subscriber will listen to when they dial L (5) after they
log onto their mailbox. The subscriber can listen to all messages, just new messages, just saved messages, or
just held messages.
● The subscriber can temporarily override this option and listen to other message types by using the
Select Listen Mode options (
1N, 1S, 1H, and 1A) from their mailbox mail menu.
● See MESSAGE LISTEN MODE (PAGE 198) for more.
Options
● All
The subscriber listens to all messages when they dial L (5).
● New
The subscriber listens to just new messages when they dial L (5).
● Saved
The subscriber listens to just saved messages when they dial L (5).
● Held
The subscriber listens to just held messages when they dial L (5).
Default
✔ All
The subscriber listens to all messages when they dial L (5).