NEC UX5000 User Manual

Customize
Mailbox Options: Message Center: [Message Notification]
398 ◆ Chapter 3: Programming UX Mail Manual
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
● W (Wait for dial tone)
This command waits for CO dial tone, and then continues.
Default
✔ Indexes 1-3 entries are None.
[Message Notification] Call Type
For each Notification Number you enter, use this option to specify the type of call the number represents
(Internal, Local, or Long Distance).
● Internal calls redial exactly as entered. They are normally 3 or 4 digits long.
● Local calls are preceded by the whatever digits or commands are entered in Customize: Tenant
Options:
[ACCESS DIGITS] BEFORE LOCAL CALLOUT (PAGE 480). They are normally 5-8 digits long, but also
include:
1+ 800 +XXX+XXXX
1+ 877 + XXX+XXXX
1 + 888 + XXX + XXXX
● Long Distance calls are preceded by whatever digits or commands are entered in Customize: Tenant
Options:
[ACCESS DIGITS] BEFORE LONG DISTANCE CALLOUT (PAGE 481). Long distance calls are normally
longer than 8 digits.
You can override the Call Type for a specific Notification Number entry, if required. For example, if the
Notification Number entry is 203 926 5400, and this is a 10-digit local call, you can set Call Type to Local
(even though it is a 10-digit call). This capability is not available to mailbox users entering callout numbers
from the mailbox.
Options
● Internal (internal call - see above).
● Local (local call - see above).
● Long Dis. (long distance call - see above).
Default
✔ Internal (internal call).
[Message Notification] Mode
Use this option to specify the type of device the Notification Number is dialing. Each device has unique
requirements and capabilities.
● Normal Notification is used when the notification destination is a normal voice destination (such as a
cell phone, home office or an internal extension).
- See
MESSAGE NOTIFICATION TO NORMAL NUMBERS (PAGE 200) for more.
● Radio Pager Notification is used when the notification destination is a radio pager.
- See
MESSAGE NOTIFICATION TO RADIO PAGERS (PAGE 201) for more.
● Digital Pager Notification is used when the notification destination is a digital (display) pager.
- See MESSAGE NOTIFICATION TO DIGITAL PAGERS (PAGE 202) for more.
● Message Delivery Notification is used to deliver all of a subscriber’s voice messages to an off-site
location, and then delete them.
- See
MESSAGE NOTIFICATION TO MESSAGE DELIVERY (PAGE 204) for more.
Options
● Normal (Normal Notification)
● Radio Pager (Radio Pager Notification)
● Digital Pager (Digital Pager Notification)
● M. Deliver (Message Delivery Notification)
Default
✔ Normal (Normal Notification)

NEC UX5000 Specifications

General

Brand	NEC
Model	UX5000
Category	Telephone
Language	English