Customize
Mailbox Options: Subscriber: [Message Notification]
UX Mail Manual Chapter 3: Programming ◆ 425
3
Mailbox Options: Subscriber: [Message Notification]
Message Notification Tab
[Message Notification] Message Notification
Use this option to enable or disable the ability of the Subscriber Mailbox user to set up Messaging Notifica-
tion. If enabled, after logging on the Subscriber Mailbox user can dial
OP + N to activate Message Notifica-
tion. If disabled, the Subscriber Mailbox user cannot activate Message Notification. In addition, if this
option is disabled, all the remaining Subscriber Mailbox Message Notification options are unavailable.
● See MESSAGE NOTIFICATION (PAGE 199) for more.
Options
● Yes or No.
Default
✔ Yes .
Compatibility Guidelines:
■ When using the UX Mail Administrator to enter dial strings, take care not to enter illegal characters
(such as dashes). Enter only those characters allowed by the option you are programming.
The following Message Notification options do not affect voice mail’s ability to light
message waiting lamps. These options are for off-site Message Notification only.
Once Message Notification is enabled in this option, the Subscriber Mailbox user must
log onto their mailbox and use the OP
+ N options to activate Message Notification.
To Next Page
Loading...
