NEC UX5000 - Using the UX Mail Copy Command

Customize
Mailbox Options: Edit
348 ◆ Chapter 3: Programming UX Mail Manual
Using the UX Mail Copy Command
To use the Copy Command:
1. From the MAIN MENU: CUSTOMIZE options, select the item from which you want to copy:
● Answering Table
● Caller ID Options Table
● Dial Action Table
● Mailbox
● Port
● Tenant
(The Subscriber Mailbox screens that follow are used as an example only.)
2. Select Copy. You see:
3. Enter the number of the mailbox that is the end of the range you want to copy.
● The Copy Command will copy the selected items to the range that extends from the current mailbox to
the mailbox specified in this step.