Customize
Mailbox Options: Guest: [Lamp/Logon/Transfer]
382 ◆ Chapter 3: Programming UX Mail Manual
[Lamp/Logon/Transfer] First Login Option
Use this option to set up the First Time Tutorial options for the Guest Mailbox. The First Time Tutorial will
occur only when the guest logs into their mailbox for the first time.
● See FIRST TIME TUTORIAL (PAGE 139) for more.
Options
● None (First Log In Option disabled).
● Option 1
At initial log in, mailbox plays Announcement Message from the First Log In Announcement Mailbox
specified below.
● Option 2
At initial log in, Mailbox plays Announcement Message from the First Log In Announcement Mailbox
specified below, followed by instructions on how to record a Personal Greeting and Mailbox name as
well as enter a Security Code.
Default
✔ None (First Log In Option disabled).
[Lamp/Logon/Transfer] First Login Announcement Mailbox
Use this option to specify the Announcement Mailbox used for the First Time Tutorial. When you make an
entry in this option, be sure you have also enabled either Option 1 or Option 2 in First Log In Option above.
The First Time Tutorial will occur only when the guest logs into their mailbox for the first time.
● From a System Administrator’s mailbox, use SA + AN + Mailbox Number + R + # to record the
Announcement Message for the Announcement Mailbox specified in this option.
● See FIRST TIME TUTORIAL (PAGE 139) for more.
Options
● Announcement Mailbox Number (7 digits maximum, using 0-9)
● N (None)
Default
● N (None)
By default, Announcement Mailboxes are 800-809.
[Lamp/Logon/Transfer] External Extension
Do not use this option. Since Message Center Mailboxes do not have extensions associated with them, the
setting of this option should not affect mailbox operation.
[Lamp/Logon/Transfer] External Extension Number
Do not use this option. Since Message Center Mailboxes do not have extensions associated with them, the
setting of this option should not affect mailbox operation.