Customize
Mailbox Options: Message Center: [General]
UX Mail Manual Chapter 3: Programming ◆ 391
3
[General] Next Call Routing Mailbox
Use this option to assign a Next Call Routing Mailbox to the Message Center Mailbox. This provides callers
with additional dialing options after they leave a message in the Message Center Mailbox (depending on the
setting of Next Call Routing Mailbox Dial Mode below).
● Clicking on the Next Call Routing Mailbox button automatically opens the programming screen for
the designated Call Routing Mailbox.
● See NEXT CALL ROUTING MAILBOX (PAGE 247) for more.
Options
● Call Routing Mailbox Number (7 digits maximum, using 0-9).
● N (None)
Default
✔ None
[General] Next CRMB Dial Mode
Use this option to determine how the Next Call Routing Mailbox option functions for the Message Center
Mailbox. There are 3 choices for this option: N, 1, and 2 (see below).
● Also see NEXT CALL ROUTING MAILBOX (PAGE 247) for more.
Option N (None - Enables 0 Action)
This option provides mailbox callers leaving a message the ability to record a message as well as use the
0
option from the Dial Action Table associated with the Next Call Routing Mailbox. Normally, the
0
option is a
UTRF to the system operator. This allows the mailbox user to record a greeting such as:
Please leave a mes-
sage at the beep, or dial 0 for assistance.
The table below shows the function of each key a caller can dial while leaving a message in the Message
Center Mailbox. Note that while recording is paused, the 0 option plays the recording options help message.
Message Center Mailbox Option N (None - Enables 0 Action)
Action While recording: While recording is paused:
0
Sends message (if any) and executes 0 action from Next
Call Routing Mailbox.
Plays recording options help message.
1
Pauses recording. Dial * to continue.
2
Pauses recording. Dial * to continue.
3
Erases message (if any) and prompts to re-record.
4
Pauses recording. Dial * to continue.
5
Plays recorded message (if any) and pauses. Dial * to append.
6
Pauses recording. Dial * to continue.
7
Pauses recording. Dial * to continue.
8
Pauses recording. Dial * to continue.
9
Pauses recording. Dial * to continue.
#
1
Sends message (if any) and hangs up.
*
Pauses and restarts recording.
Timeout
Pauses recording. Dial * to continue.
To Next Page
Loading...
