EasyManua.ls Logo

NEC UX5000 - Page 410

NEC UX5000
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customize
Mailbox Options: Message Center: [General]
392 Chapter 3: Programming UX Mail Manual
With this option set to N and no Next Call Routing Mailbox is entered:
Dialing # sends the message and hangs up
If the call initially came from a Call Routing Mailbox (such as the Automated Attendant), dialing #
sends the message and routes the caller back to the initial Call Routing Mailbox (also called the previ-
ous Call Routing Mailbox).
Option 1 (Enables Actions 0-9)
This option provides mailbox callers leaving a message the ability to record a message as well as use
the 0-9
options from the Dial Action Table associated with the Next Call Routing Mailbox. The table below shows
the function of each key a caller can dial while leaving a message in the Message Center Mailbox.
1
If the call is routed from a Call Routing Mailbox (e.g., the Automated Attendant), dialing # routes the call back to that
Call Routing Mailbox (the previous Call Routing Mailbox) and plays its Instruction Menu.
Message Center Mailbox Option 1 (Enables Actions 0-9)
Action While recording: While recording is paused:
0
Sends message (if any) and executes 0 action from Next
Call Routing Mailbox.
Plays recording options help message.
1
Sends message (if any) and executes 1 action from Next
Call Routing Mailbox.
N/A
2
Sends message (if any) and executes 2 action from Next
Call Routing Mailbox.
N/A
3
Sends message (if any) and executes 3 action from Next
Call Routing Mailbox.
Erases message (if any) and prompts to re-
record.
4
Sends message (if any) and executes 4 action from Next
Call Routing Mailbox.
N/A
5
Sends message (if any) and executes 5 action from Next
Call Routing Mailbox.
Plays recorded message (if any) and pauses.
Dial * to append.
6
Sends message (if any) and executes 6 action from Next
Call Routing Mailbox.
N/A
7
Sends message (if any) and executes 7 action from Next
Call Routing Mailbox.
N/A
8
Sends message (if any) and executes 8 action from Next
Call Routing Mailbox.
N/A
9
Sends message (if any) and executes 9 action from Next
Call Routing Mailbox.
N/A
#
1
Sends message (if any) and hangs up.
*
Pauses and restarts recording.
Timeout
Pauses recording. Dial * to continue.
1
If the call is routed from a Call Routing Mailbox (e.g., the Automated Attendant), dialing # routes the call back to that
Call Routing Mailbox (the previous Call Routing Mailbox) and plays its Instruction Menu.

Table of Contents

Other manuals for NEC UX5000

Related product manuals