Customize
Mailbox Options: Message Center: [Messaging]
402 ◆ Chapter 3: Programming UX Mail Manual
[Messaging] Urgent Message Return Time
Use this option to enable or disable the ability of voice mail to provide the Message Center Mailbox user
with the status of Urgent Messages they have sent. When the user sends an urgent message, voice mail waits
this interval to determine if the recipient has listened to the message. If not, when the Message Center Mail-
box user dials
L to listen to their messages, voice mail plays a voice prompt indicating that the urgent mes-
sage has not been heard. It then plays a copy of the urgent message.
● See URGENT MESSAGE (PAGE 302) for more.
Options
● 1-999 Minutes
● N (None)
Default
✔ N (None)
[Messaging] Recording Conversation Beep
Use this option to enable or disable the Conversation Record beep. If enabled, all parties on a call will hear
the voice prompt Recording followed by a beep when the Message Center Mailbox extension user initiates
Conversation Record. If disabled, the voice prompt and beep will not occur.
● See CONVERSATION RECORD (PAGE 108) for more.
Options
● Yes or No.
Default
✔ Yes
[Messaging] Ask Caller’s Number
Use this option to enable the Make Call feature for the Message Center Mailbox. Once enabled, voice mail
asks the caller leaving a message to enter their number prior to leaving the message. This allows the guest to
listen to the message and then dial
MC to call the person back – without knowing the caller’s number. Nor-
mally, this feature is used when Caller ID is not available or installed.
● This option is not required for Make Call to work to UX5000 extensions. It is only required to enable
Make Call for outside (Automated Attendant) callers.
● Make Call follows the same programming and restrictions as Message Notification.
● See MAKE CALL (PAGE 186) for more.
Options
● Yes or No.
Default
✔ No
Since Message Center Mailboxes normally do not have extensions associated with
them, the setting of this option should not affect mailbox operation.