EasyManua.ls Logo

NEC UX5000 - [General] Department; [General] Extension; [General] Name; [General] Next Call Routing Mailbox

NEC UX5000
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customize
Mailbox Options: Subscriber: [General]
UX Mail Manual Chapter 3: Programming 419
3
[General] Name
You can program a name for a Subscriber Mailbox. Voice mail can use this name for Directory Dialing. This
name also appears on system reports.
To allow Automated Attendant callers to Directory Dial a Subscriber Mailbox, be sure to define the
Subscriber Mailbox leading digit in your Dial Action Tables. For example using the default mailbox
numbering:
- To Directory Dial to extensions 300-399, for digit 3 be sure Action = TRF or UTRF and Number =
XXX.
- To Directory Dial to mailboxes 300-399, for digit 3 be sure Action = GOTO and Number = XXX.
See DIRECTORY DIALING (PAGE 120) for more.
To record a name for a Subscriber Mailbox, see MAILBOX NAME (PAGE 180).
See REPORTS (PAGE 267) for more on the system’s reports.
Options
Characters (25 characters maximum, using A-Z)
Default
No entry.
[General] Department
Use this option to assign a department name to the Subscriber Mailbox. This information appears on the Dis-
tribution List (page 495) and Mailbox Options (page 497) reports.
Options
Characters (10 characters maximum, using any keyboard characters).
Default
No entry.
[General] Extension
Use this option to assign an extension to a Subscriber Mailbox. Normally, the extension number and the
Subscriber Mailbox number are the same.
Options
Digits (7 digits maximum, using 0-9).
Default
The Subscriber Mailbox numbers are the same as the extension numbers.
[General] Next Call Routing Mailbox
Use this option to assign a Next Call Routing Mailbox to the Subscriber Mailbox. This provides callers with
additional dialing options after they leave a message in the Subscriber Mailbox (depending on the setting of
Next Call Routing Mailbox Dial Mode below).
Clicking on the Next Call Routing Mailbox button automatically opens the programming screen for
the designated Call Routing Mailbox.
See NEXT CALL ROUTING MAILBOX (PAGE 247) for more.
Options
Call Routing Mailbox Number (7 digits maximum, using 0-9).
N (None)
Default
811

Table of Contents

Other manuals for NEC UX5000

Related product manuals