NEC UX5000 - Page 234

Message Notification
216 ◆ Chapter 2: Features UX Mail Manual
#
Go back to Message Notifica-
tion Options Menu without
changing the priority order
0
Plays Help message at any menu level.
Entering Special Dial Codes
Function Description Dial Code
S
(Wait for sound) Wait 2 seconds for any constant sound
(such as non-standard dial tone), then
continue if sound is detected.
*H (*4)
W (Wait for dial tone) Wait for CO dial tone and then continue. *W (*9)
P (Pause) Wait 2 seconds and then continue. *P (*7)
M (Monitored pause) Wait 2 seconds, and then continue if busy
tone or reorder tone are not detected.
*M (*6)
A (Analyzed pause) Wait 4 seconds, and then continue if busy
tone or reorder tone are not detected.
*A (*2)
*
Dials the digit *.
**
#
Dials the digit #.
*#
Erase number Erases the entire callout number.
*0
Answering a Message Notification Callout
To answer a Normal Message Notification callout:
1.
Answer callout at programmed destination.
■ Voice mail must hear your answer to proceed.
2. Dial 1 to accept the Message Notification,
OR
Hang up to have Message Notification call back later.
3. Enter the mailbox’s Security Code (if requested).
4. You automatically log onto the user’s mailbox.
To answer a Radio Pager or Digital Pager Message Notification callout:
1.
Operation is automatic.
To answer a Message Delivery Message Notification callout:
1.
Answer callout at programmed destination.
■ Voice mail must hear your answer to proceed.
2. You hear all of the mailbox’s new messages.
■ The new messages are automatically saved in the mailbox.
Setting Up Message Notification (Page 3 of 3)