NEC UX5000 - Page 327

Welcome Message
UX Mail Manual Chapter 2: Features ◆ 309
2
Programming
Step 1 To turn off the default Welcome Message (and Instruction Menu):
1.1 CUSTOMIZE: MAILBOX OPTIONS EDIT: CALL ROUTING: [CALL HANDLING] PLAY DEFAULT MESSAGES
(PAGE 360).
- Use this option to enable (Yes) or disable (No) the default Instruction Menu and Welcome
Message for a Call Routing Mailbox.
-If enabled and the Instruction Menu and Welcome Message are not recorded, an Auto-
mated Attendant caller hears the default recordings.
-If disabled and the Instruction Menu and Welcome Message are not recorded, the caller
hears silence.
- If you record an Instruction Menu and Welcome Message and then disable this option,
voice mail erases your recordings.
✔ By default, this option is disabled (No).
Operation
Recording a Welcome Message for a Call Routing Mailbox
Log onto System Administrator’s mailbox (301)
SA (72) Access System Administrator options
W (9) Select Welcome Messages
Enter the Call Routing Mailbox number
L (5) Listen to the current Welcome Message (if any) + #
C (2) Copy the Welcome Message from another Call Routing Mailbox
Enter Call Routing Mailbox number
R (7) Record a new Welcome Message
Record message + #
E (3) Erase the Welcome Message
# Go to another Call Routing Mailbox
## Go back to the System Administrator options
0
Plays Help message at any menu level