Auto Attendant Do Not Disturb
UX Mail Manual Chapter 2: Features ◆ 61
2
Operation
Setting Up Auto Attendant Do Not Disturb
(If you don’t see a Soft Key, press More> until it appears.)
Log onto Subscriber Mailbox
[Greet]
Access the Mailbox Greeting options
• Alternately dial
G (4).
Voice mail plays a summary of your current settings
• By default, greeting 1 is active and Auto Attendant Do Not Disturb is off
[Gr1-Gr3]
Select a greeting (Gr1 = greeting 1, Gr2 = greeting 2, Gr3 = greeting 3).
[Lstn]
Listen to the active greeting (if recorded).
• Alternately dial
L (5).
[Pause]
Pause listening.
• Alternately dial *.
[Resume]
Resume listening.
• Alternately dial *.
[Erase]
Erase the currently recorded message.
• Alternately dial
E (3).
[Exit]
Exit the listen mode.
• Alternately dial
#.
N/A
Backup a few seconds.
•Dial
B (2).
N/A
Backup to beginning.
•Dial
BB (22).
N/A
Go forward
•
G (4).
N/A
Turn volume up
•
VU (88).
N/A
Turn volume down
•
VD (83).
N/A
Return volume to normal
•
VN (86).
N/A
Turn Auto Attendant Do Not Disturb off or on (if a greeting is recorded)
• Alternately dial
O (6).
[Rec]
Record a new greeting (if not recorded), or rerecord the active greeting (if
recorded).
• Alternately dial
R (7).
Record message.
[Pause]
Pause recording.
• Alternately dial *.
[Resume]
Resume recording.
• Alternately dial *.
[Done]
Save the recording and exit the recording mode.
• Alternately dial
#.