R&S ZNB - Page 1025

Command Reference
R&S
®
ZNB/ZNBT
1025User Manual 1173.9163.02 ─ 55
Parameters:
<Boolean> 0 – hide the "Info Window" (default)
1 – show the "Info Window"
Manual operation: See "Info Window" on page 690
DISPlay:IWINdow:BFILter[:STATe] <TraceName>, <BandfilterItem>, <Boolean>
Defines the bandfilter search results to be displayed in the Info Window.
Parameters:
<Boolean> 0 – Result <BandfilterItem> of trace <TraceName> is displayed
1 – Result <BandfilterItem> of trace <TraceName> is hidden
Setting parameters:
<TraceName> Name of the related trace.
<BandfilterItem> CENTer | BANDwidth | UPPer | LOWer | LOSS | QFACtor |
QFA3 | HEADer
Bandfilter search result (see Display Elements of a Diagram)
Manual operation: See "Content Selection" on page 694
DISPlay:IWINdow:MARKer<Mk>[:STATe] <TraceName>, <Boolean>
Defines the markers to be displayed in the Info Window.
Suffix:
<Mk>
.
Marker number.
Parameters:
<Boolean> 0 – Marker <Mk> of trace <TraceName> is displayed
1 – Marker <Mk> of trace <TraceName> is hidden
Setting parameters:
<TraceName> Name of the related trace.
Manual operation: See "Content Selection" on page 694
DISPlay[:WINDow<Wnd>][:STATe] <Boolean>
Creates or deletes a diagram area, identified by its area number <Wnd>.
Suffix:
<Wnd>
.
Number of the diagram area to be created or deleted.
Parameters:
<Boolean> ON | OFF - creates or deletes diagram area no. <Wnd>.
*RST: -
SCPI Command Reference