Command Reference
R&S
®
ZNB/ZNBT
1082User Manual 1173.9163.02 ─ 55
Setting parameters:
<TraceFile> String parameter to specify the name and directory of the trace
file to be loaded. Several file formats for trace files are suppor-
ted. The file extensions *.s<n>p, *.csv, and *.dat for Touch-
stone, ASCII, and Matlab files are mandatory.
If no path is specified the analyzer searches the current direc-
tory, to be queried with MMEMory:CDIRectory
Usage: Setting only
Manual operation: See "Auto Distribute" on page 339
MMEMory:LOAD:VNETworks<Ch>:BALanced:DEEMbedding<LogPt>
<TouchstoneFile>[, <Interchange>]
Loads data from the specified Touchstone file defining a balanced port circuit model for
deembedding.
The balanced port circuit models STSL | STSC | SLST | SCST require two 2-port
(*.s2p) files, to be assigned to the different ports PMAin and PSECondary; the
FIMPort model requires a single 4-port (*.s4p) file but no additional port assignment.
Use
●
CALCulate<Ch>:TRANsform:VNETworks:BALanced:
DEEMbedding<LogPt>:TNDefinition to select the adequate circuit model
before executing this command.
●
CALCulate<Ch>:TRANsform:VNETworks:BALanced:
DEEMbedding<LogPt>:PARameters:DATA<Port> to load circuit data from the
remote client.
The query returns the name of the loaded file.
Suffix:
<Ch>
.
Channel number
<LogPt> Logical port number
Parameters:
TouchstoneFile String parameter to specify the name and directory of the loaded
Touchstone file.
If no path is specified the analyzer searches the current direc-
tory, which can be set and queried using MMEMory:
CDIRectory
<Port> PMAin | PSECondary
Port assignment for two 2-port (*.s2p) files:
PMAin - Port 1
PSECondary - Port 2
The ports must be specified for the import of 2-port (*.s2p)
files; they must be omitted for 4-port (*.s4p) files.
<Interchange> FPORts | IPORts | SGATes | SINCreasing
SCPI Command Reference
To Next Page
Loading...
