R&S ZNB - Page 784

Command Reference
R&S
®
ZNB/ZNBT
784User Manual 1173.9163.02 ─ 55
CALCulate<Ch>:DATA:CHANnel:ALL? <Format>
Reads the current response values of all traces of the selected channel.
Suffix:
<Ch>
.
Channel number
Query parameters:
<Format> FDATa | SDATa | MDATa
Output format for the S-parameter data, see
CALCulate<Chn>:DATA.
Return values:
<Data> Trace data either in ASCII or block data format, depending on
the current FORMat[:DATA] setting.
Usage: Query only
CALCulate<Ch>:DATA:CHANnel:DALL?
<Format>
Reads the current response values of all data traces of the selected channel. Use
CALCulate<Ch>:DATA:CHANnel:ALL? to query data traces and memory traces.
Suffix:
<Ch>
.
Channel number
Query parameters:
<Format> FDATa | SDATa | MDATa
Output format for the S-parameter data, see
CALCulate<Chn>:DATA.
Return values:
<Data> Trace data either in ASCII or block data format, depending on
the current FORMat[:DATA] setting.
Usage: Query only
CALCulate<Ch>:DATA:MDATa:INTerpolate
Uses linear inter-/extrapolation to "regrid" all memory traces of the related channel to
the channel's current stimulus values.
Suffix:
<Ch>
.
Channel number
Usage: Event
CALCulate<Ch>:DATA:SGRoup? <Format>
Reads the current response values of all S-parameters associated to a group of logical
ports (S-parameter group). The S-parameter group must be created before using
CALCulate<Ch>:PARameter:DEFine:SGRoup.
SCPI Command Reference