COVER INTERPOSER TRAY CI5000 (B835)
B234/B235/B236/D101/D102/D103 1-78 SM
7. Remove the front inner cover [A] from the dual tray ( x2).
8. Fasten the tray unit to the top of the transport unit with the knob screws [B] (
x2).
9. Attach the base cover [C] ( x1).
Important: Make sure the holes in the cover are matched with the positions of
the reference pins.
10. Re-attach the front inner cover [D] (removed at [A] above).
11. Position the tray unit front door [E] so its hinges match the posts on the frame
of the tray unit.
12. Hold the lower L-pin [F] as shown, insert it halfway, push it up, then rotate it into
its groove.
13. Hold the upper L-pin [G] as shown, insert it halfway, push it down, then rotate it
into its groove.
B835I111A.WMF
B835I113.WMF
[C]
[D]
[A]
[B]
[E]
[G]
[F]
To Next Page
Loading...
